The purpose of Air Balancing is to make houses more energy efficient by reducing energy use during cooling and heating periods, respectively. Why would anyone care about air balancing? If your house has a window air conditioning unit, have you ever thought about the effect that it may have on the temperature inside the building? Not only does air conditioning units provide comfort during the summer months and lower energy bills during the winter months, but also during the spring and fall months.
Many people are concerned that increased indoor temperatures could cause health problems, especially if occupants spend a lot of (972) 818-9000 time outside during warmer weather. Another common question is how much energy (electric bill) is spent on air balancing.To Rirchardson answer these questions, consider the cost to run a single air conditioner for an entire home or business.This cost is in addition to the cost of purchasing, 75081 installing, and maintaining the system. To get an idea of how many air balances can be installed on a specific HVAC (heating, ventilation, air conditioning) system, multiply the number of air conditioning systems by the number of square feet of total area in the building.
Many professionals recommend that air testing, either by an independent professional or through an HVAC company, be performed before a house is sold or bought. This helps to determine if current airflow requirements are met and if adjustments need to be made to optimize air conditioning output. When air balancing is performed by a professional HVAC company, special equipment can measure ambient air pressure, humidity level, temperature, and airflow. Other factors that may need adjusting include ceiling height, window size, and the number of window areas.
The third question most commonly asked is whether or not the home owner will need to obtain a Building Permit prior to air balancing. Most air conditioning systems are not considered hazardous, but the lack of proper ventilation can be a safety issue. Permits are required when any modifications are made to the property, including installing new appliances, to make them comply with local health codes. If a building is modified so that it meets or exceeds the required building and ventilation codes, the seller must get a Building Permit prior to selling the property.
A final question often asked is if air testing or hydronic testing should be done prior to or air balancing company after the purchase of a home? Air sampling is often recommended as part of a home inspection or when purchasing a used home. Air sampling allows a home inspector to determine what contaminants are present in the air, and to establish the frequency and amount of airflow needed for healthy indoor air. While there are many benefits to doing regular airflow measurements, especially during initial home testing, most buyers find it unnecessary to repeat these airflow tests every time they purchase a home.
Hydronic air balancing is usually required for newly constructed homes, because in New England air needs to maintain a constant temperature. Air flow testing is usually required when an existing structure was not built properly. Home inspectors and builders are usually skilled in identifying problematic airflow problems and building codes require specific procedures for each.The best solution for home buyers 1651 N Glenville Dr. Ste 201 is to get an expert opinion. A hydronic specialist can complete a professional air monitoring report that includes airflow testing, pictures of exhaust airflow (at various stages of operation), and moisture tests. This report can help the buyer determine whether or not there are any significant airflow issues with the home, and it can help the seller make the necessary changes to correct the problem
Visit Linkedin
